Single window Tracking and Traceability Solution

RFID Solar Tag

  • PV tracker tags

    RFID Solar Pv Tags

    RFID PV Tracker tag is specially design & tested for pv module tracking which contains a unique identity. Data mentioned by the MNRE is store in tag memory. It is capable of withstanding harsh environmental conditions like temperature, humidity, UV ray & rain etc. it is available in different form factor which will suitable for various pv modules of diverse sizes. It can be tag externally (below junction box ) after quality control.

 

Features:
 High memory size for all relevant data store.
 Better read and write performance.
 Long life tag.
 Customizes design.
 IP-68 protected.
  Working temperature -20 ° C to 150° C.
 Communication protocol ISO18000-6C.
 Anti-Collision Mechanism.


  • E-toll Tags

    IAITO’s E-Toll tags are specially designed dedicatedly for Vehicle Tracking Applications, fully comply with “Central Motor Vehicles (First Amendment) Rules, 2013” In the Central Motor Vehicles Rules, 1989, rule 138A. Fitment of Radio Frequency Identification Tag” provides complete automated way to track any vehicle to specified location, E-Toll tags offer customers a more accurate and secure way to allow access into various locations like a gated community, company / corporate secured parking or even a car wash.

    The inlay is encapsulated between thin layers of polypropylene and other UL certified materials adding human readable printing to one side and a windshield compatible adhesive to the other.

 
Features:
 Tamper proof design approved by MNRE.
 Low cost Tag.
 Tags are in UHF frequency range of 860 MHz to 960 Mhz.
 Tags comply with the protocol EPC Gen-2, ISO 18000-6C
 Unique TID is printed for visual recognition.
  High End UL certified materials are used for UV and environmental protection.


  • Jewelry Tags

    Jewelry RFID UHF Label Tag has been specifically designed to meet the tracking requirements of the jewelry industry in terms of size, shape and ease of fixation. The UHF RFID Tag is embedded in a white patented adhesive label adaptable to any type of jewelry piece, including rings, earrings and necklaces.

    The RFID labels enable jewelry to be quickly and reliably identified all along their distribution chain, from warehouses to point-of-sales. Whether in bags, on trays or on shelves, several pieces of jewelry can be easily inventoried using fixed or portable RFID reading stations.

 
Features:
 Tamper proof design approved by MNRE.
 Low cost Tag.
 Tags are in UHF frequency range of 860 MHz to 960 Mhz.
 Tags comply with the protocol EPC Gen-2, ISO 18000-6C
 Unique TID is printed for visual recognition.
  High End UL certified materials are used for UV and environmental protection.


  • Embedded tags

    RFID Embedded Tag is specially design and tested for internal pv module tagging which contains a unique identity and Placed inside the module laminate. Data mentioned by the MNRE is store in the tag memory. It is capable of withstanding Harsh environmental condition like temperature, humidity, UV ray & rain etc. this customize tag is designed in such a way that it comply all the MNRE mandated for various PV modules of diverse size. It can be tagged internally (i.e. b/w the module frame & cell) during lamination.

 
Features:
 High memory size for all relevant data store.
 Better read and write performance.
 Long life tag.
 Customizes design.
 IP-68 protected.
  Working temperature -20 ° C to 150° C.
 Communication protocol ISO18000-6C.
  Anti-Collision Mechanism.
 Frequency Range 860 MHz – 960 MHz

  • High Temperature Tags

    These are rugged metallic tags with high efficiency to work in high temperature, high pressure & chemical environment. Slim design offers easy mounting on metal surface with any adhesive or other options. It performs same on both metal and non-metal. Can be applied to the harshest environments in temperature, mechanical shock and chemical stress. If you would need any tags lasting, then this is it! Metallic& non metallic container and pallet, IT asset (server and lap-top), Electronics and semiconductors, Motors and vehicles, Tire molding tools, Ferrous and non ferrous products, Construction and chemical plant parts, Power plants, Medical autoclaves, etc.

 
Features:
 168 hours’chamber test at 85C degree/ 95% relative humidity
 Passes if difference between pre-chamber and post-chamber tag’s resonant center frequency is below 5MHz
 6 hours'chamber test at 200C degree
 Passes if difference between pre-chamber and post-chamber tag’s resonant center frequency is below 5MHz
 Total 500 cycles with each cycle 90 minutes from -45C degree to 85C degree
  Passes if difference between pre-chamber and post-chamber tag’s resonant center frequency is below 5MHz
 Soaked 6 hours at 200C degree boiling oil
  Passes if difference between pre-chamber and post-chamber tag’s resonant center frequency is below 5MHz


  • Mount on metal Tags

    Metal tag provides totally new benchmark for low-cost in passive rfid in its size and durability (IP68) to various customer requirements. The tag can be mounted easily on any metallic surfaces either with industrial adhesive or mechanically e.g. with pop rivets. It’s performance enables several on-metal identification challenges to be solved which earlier where impossible with passive RFID. It has passed the rigorous testing requirements. It has been successfully used in tracking assets from steel pallets to train wagons.

 
Features:
 Operating temperature: -40°C to +85°C / -40°F to +185°F
 IP classification: IP68
 Device type: Class 1 Generation 2 passive UHF RFID transponder
 Read range: up to 6-7 m / 20-23 ft reader power 2W ERP
 Applicable surface materials : Matal surface
  IC options : NXP UCODE G2XM
 Weather ability: Good, incl. UV-resistance and sea water


  • Asset tags – UHF

    Passive, UHF technology based on the EPC Gen 2 protocol is being used to track assets as diverse as file folders, pallets, library books and PCs. Passive tags are used to facilitate manage inventory of tools and equipment at far lower cost and with less ongoing maintenance. Passive RFID can also be used to control access to valuable assets and to maintain chain of custody. Tags based on second wave Gen 2 ICs have driven performance even further and deliver a medium range of several meters that’s sufficient to cover most in-building asset tracking applications in office and manufacturing environments.

 
Features:
 Asset management includes adding new assets, asset allocation, asset retirement by Scrapping, maintenance & repair, inventory and other.
 Asset life cycle management” and “automatic asset management”
 Achieve synchronized management of “staff, location, time, and assets” in asset management
 Truly paperless asset management: User can access the system via IE browser anytime, anywhere.
 Research results of project implementation facilitates formulation of RFID technology standards.
  Eliminating manual operation and reducing error rate


  • Library tags – UHF

    A complete RFID solutions optimized for public libraries and academic libraries to achieve exceptional application results in library collection inventory, item search, self service loan, self-service return, and library collection security management helps increasing efficiency and good experience.

 
Features:
 Freeing up staff time
 Faster & easier-to-use self-service units
 Better ways to process returns
 Smarter ways to manage collections
 OH&S benefits through reduced handling
  Extend collection security to all items
  Positioning your library as an innovator